show ipv6 fhs port-policy

Displays the RA-guard policy name configured and RA-guard statistics.

Syntax

Command Parameters

{slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

User EXEC

Command Output

The show ipv6 fhs port-policy command displays the following information:

Output field

Description

PORT

Indicates the port number.

DHCPV6G-POLICY

Indicates the DHCPv6 policy name.

RA-POLICY

Indicates the RA Guard policy name.
9039033-00 Rev AA